Walkera HM4H6 micro helicopter
1 Jan 12 -
Model information added
N° of launches / Time | 4 |
0 hours 30 mins |
|
Rotor Diameters | Main | 10.2 in. | 258 mm |
Tail | 3.0 in. | 76 mm | |
Weight | 2.8 oz | 80 g | |
Motor | Walkera WK-WS-12-003 Brushless Motor (Pre-installed) | ||
Main gearbox | Motor to main rotor is 13.3:1 (160T:12T) | ||
Tail gearbox | Geared 1:3.5 to the main rotor | ||
Speed Controller | Walkera WK-WST-10A-L - 10A - 1S LiPo - BEC (Pre-installed) | ||
Battery Pack | 1s1p LiPo 600mAh (supplied) | ||
Receiver | Walkera RX-2428 2-in-1 module: 4ch - 2.4GHz - RX & Gyro | ||
Servos | Cyclic - Roll | Walkera WK-02-1 - 3.2g - 0.12s/60° | |
Cyclic - Pitch | Walkera WK-02-1 - 3.2g - 0.12s/60° | ||
Tail | Walkera WK-03-2 - 3.5g - 0.12s/60° | ||
Gyro | Part of the RX module | ||
Flight performance | Flies very similarly to the 4B100 due to have very similar geometry in the head design. The wire driven tail gives much better authority than most micro helicopters have and gets rid of the start-up problem the CB100 and 4B100 suffer from. |
1 Jan 12 - I've had this model for sometime but never got around to adding it until now.